online store Snow Performance Stage 3 Boost Cooler / Water Methanol Kit (Turbo | Benzine) | JT-Products
top of page

Snow Performance Stage 3 Boost Cooler / Water Methanol Kit (Turbo | Benzine)

 

LET OP!

Deze kit is beschikbaar in 2 verschillende types.

 

1. Boost Cooler Stage 3 DI (Direct Injection)

Our Topsystem for your direct injected engine. 2D-Mapping over fuel injection and boost, easy programmable LCD-display incl. new Dual Stage Technology and terminated weather tight OEM harnessed wiring connections !
Award winning system - our high-end model for your car. The controller creates a delivery map based boost and fuel pressure sensor voltage.

 

  • Boost / fuel controlled, variable injection
  • Dual Stage Technology
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation

 

 

2. Boost Cooler Stage 3 EFI (Electronic Fuel Injection)

Our Topsystem for your Turbo-/Supercharged car. 2D-Mapping thorugh fuel injection and/or boost. Easy programmable LCD-display incl. new Dual Stage Technology and terminated weather tight OEM harnessed wiring connections !
Award winning system - The controller creates a delivery map based boost and/or EFI signal. For all charged and naturally aspirated engines with traditional EFI system.

 

  • Boost / fuel controlled, variable injection
  • Dual Stage Technology
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation

 

More Power by Boost Cooler

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

 

116 Octane Race Gas Performance

Water or water/methanol is injected into the intake air using the patented high-pressure pump. The evaporation mist achieves extremely effective intake air and intercooling, whereby, among other things, an uncontrolled combustion ("knocking") is prevented. The effect is demonstrably comparable with 116 octane racing gasoline.

 

Dual Stage Technologie (DST)

The Stage 3 has the ability to progressively command 2 Hyper-Sonic? Nozzles independently of one another. This sophisticated dual stage injection management yields the highest increases in HP and cooling along all stages of the engine allowing you to greatly increase the boost & timing of your vehicle safely. The DST-Upgrade is already included in the European Stage 3 systems.

Universeel

Snow Performance Stage 3 Boost Cooler / Water Methanol Kit (Turbo | Benzine)

Productcode: SP10317/SP10315
PrijsVanaf € 978,00
incl.BTW |
  • For all turbo-/supercharged engines

  • Optimal Cooling with Water Injection

    The Boost Cooler injection works in three ways: Firstly, when water is injected into the intake system prior to the cylinder head, the small droplets absorb heat from the intake air.

    When we apply heat energy to it, its molecules begin to expand: a great deal of heat is absorbed during this process owing to water´s specific heat capacity - approximately 4.2kJ/(kg.K). Next, the small droplets of water start to evaporate. And so the intake air charge is cooled still further (up to 60°C and more).

    Finally, when the remaining water droplets and water vapour reach the combustion chamber, steam is produced. When the water changes from the liquid to gas state, large amount of heat energy is consumed in sustaining the process. The latent heat of evaporation is 2256kJ/kg, approx. six times more than gasoline.

bottom of page