MST Performance Intake Kit 2.0 TSI EA888.3 MQB (Golf 7 GTI/R - Audi A3/S3 8V - Seat Leon 5F Cupra)

Let op:
Deze intake kit is te bestellen in twee verschillende versies. Het verschil zit in de Turbo Inlet Elbow (TIE). Bij een van de twee kits zit een TIE met een grotere binnendiameter aan de kant van de turbo. Dit zorgt voor maximale airflow. Deze is zeer geschikt voor hybrid turbo's, kies dus de intake kit die voor jou van toepassing is!


 

Intake Kit 1:

Air Filter Induction Kit with Intake Hose & Turbo Inlet Elbow

 

- MST Performance Air Filter Intake Kit

MST Performance intake kit for MQB chassis vehicles such as the VW Golf mk7 GTI & R, Audi S3, Seat Leon & Skoda Octavia VRS, equipped with the 1.8 & 2.0 TSI engines.

This intake is a direct replacement for the standard air box and fits the standard mounting points.

Includes a performance nanofibre dry air filter, fitting kit, high quality laser cut heat shield & lightweight aluminium pipework, finished in a textured black powder coat finish.

This kit provides increased airflow and induction noise over and above the standard intake equipment.
 

- MST Performance 3″ Silicone Intake Pipe

The MST Performance Silicone Intake Pipe has been designed to replace the standard OEM plastic induction hose on the 2.0 TSI EA888 engine in the VW Golf mk7 GTI, VW Golf mk7 R, Audi S3, SEAT Leon Cupra and other MQB platform vehicles..

The hose is constructed to provide a constant radius reducing restriction in the initial stage of the intake tract and is a direct replacement for the factory pipework.

The hose is supplied with a pair of high quality Stainless Steel W2 hose clamps replacing the difficult to use OEM spring clamps.

The hose is made from high-quality mutli-ply silicone with wire wound reinforcement.

It can be used in conjunction with the standard factory air box or any aftermarket induction kit that mounts to the standard air box position.

 

- MST Performance Turbo Inlet Elbow

This is an upgraded turbo inlet pipe for the IHI turbo chargers used on the 2.0 and 1.8 TFSI (EA888) engines used in MQB chassis vehicles such as the Golf GTI (MK7) and Audi S3 (8V).

This is a direct replacement for the standard turbo inlet elbow, however due to it’s larger diameter it must be used in conjunction with the supplied MST performance silicone hose.

The inlet elbow comes with all the fittings required and is supplied with clear step-by-step photographic instructions.

Supplied with the kit is a replacement O-ring in case the standard part is worn or perished.

This part allows for increased potential airflow and slightly increased induction sound.

The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket, is fully TIG welded and powder-coated in a mottled black finish for an OEM look.


 

Intake Kit 2:

Air Filter Induction Kit with Intake Hose & Oversized Turbo Inlet Elbow (Hybrid)

 

- MST Performance Air Filter Intake Kit

MST Performance intake kit for MQB chassis vehicles such as the VW Golf mk7 GTI & R, Audi S3, Seat Leon & Skoda Octavia VRS, equipped with the 1.8 & 2.0 TSI engines.

This intake is a direct replacement for the standard air box and fits the standard mounting points.

Includes a performance nanofibre dry air filter, fitting kit, high quality laser cut heat shield & lightweight aluminium pipework, finished in a textured black powder coat finish.

This kit provides increased airflow and induction noise over and above the standard intake equipment.
 

- MST Performance 3″ Silicone Intake Pipe

The MST Performance Silicone Intake Pipe has been designed to replace the standard OEM plastic induction hose on the 2.0 TSI EA888 engine in the VW Golf mk7 GTI, VW Golf mk7 R, Audi S3, SEAT Leon Cupra and other MQB platform vehicles..

The hose is constructed to provide a constant radius reducing restriction in the initial stage of the intake tract and is a direct replacement for the factory pipework.

The hose is supplied with a pair of high quality Stainless Steel W2 hose clamps replacing the difficult to use OEM spring clamps.

The hose is made from high-quality mutli-ply silicone with wire wound reinforcement.

It can be used in conjunction with the standard factory air box or any aftermarket induction kit that mounts to the standard air box position.

 

- MST Performance 3″ Turbo Inlet Elbow (Hybrid Turbo Version)

This is an oversize turbo inlet pipe for the IHI turbo chargers used on the 2.0 and 1.8 TFSI (EA888) engines used in MQB chassis vehicles such as the Golf GTI (MK7) and Audi S3 (8V).

The inner diameter is much bigger as the stock one and therefore a huge power gain will be seen.
This is a direct replacement for the standard turbo inlet elbow, however due to it’s larger diameter it must be used in conjunction with the supplied MST performance silicone hose.

The inlet elbow comes with all the fittings required and is supplied with clear step-by-step photographic instructions.

Supplied with the kit is a replacement O-ring in case the standard part is worn or perished.

This part allows for increased potential airflow and slightly increased induction sound.

The inlet elbow is made from light weight aluminium tube with CNC machined connections and a laser cut bracket, is fully TIG welded and powder-coated in a mottled black finish for an OEM look.

Audi A3 8V 1.8 TFSI
Audi A3 8V 2.0 TFSI
Audi S1 8X 2.0 TFSI
Audi S3 8V 2.0 TFSI
Audi TT 8S 2.0 TFSI
Audi TTS 8S 2.0 TFSI
Seat Leon 5F 1.8 TSI
Seat Leon 5F Cupra
Seat Leon 5F Cupra 4WD
Skoda Octavia 5E vRS
Volkswagen Golf 7 GTI
Volkswagen Golf 7 R

MST Performance Intake Kit 2.0 TSI EA888.3 MQB (Golf 7 GTI/R - Audi A3/S3 8V)

€ 510,00

€ 510,00

Type downpipe:

arrow&v

Type downpipe:

arrow&v

Type downpipe:

arrow&v

Type downpipe:

arrow&v

Type downpipe:

arrow&v

Aantal

please select all options

Toepasbaarheid

Audi A6 Avant C6
2.0 TDI
2009-2011
170 hp
FWD/QUATTRO
AUTOMAAT; MULTITRONIC